HOME >> PRODUCTS >> Cylindrical Cell Lab Machine
100L Battery Slurry Planetary Vacuum Mixing Machine
Application Scope
After the slurry is prepared by the mixer, the bucket is moved to the lifting machine, covered with a mixing head to form a transfer tank. This setup completes slurry transfer from the mixing area to storage or coating area. The slurry is delivered to the main storage tank or coater via quick-connect adapters.
Container Parameters
l Design Total Volume: 140 L
l Effective Volume: 45–100 L
l Inner Diameter: 596 mm
l Inner Depth: 500 mm
l Material (contacting with medium): SS304
l Jacket Type: Single-layer on side and bottom, for heating or cooling
l Jacket Connection: G3/4″ quick coupling, pressure ≤0.4 MPa
l Jacket Circulation: Customer-supplied; inlet ≤8 °C, flow >40 L/min
l Discharge: One G1-1/2″ three-piece ball valve at bottom with 2″ ISO quick coupling
l Ambient Temperature: –10 °C to +120 °C
l Movement: On casters
l Interchangeable with 100 L mixer bucket
Mixing Components
l Frequency: 50 Hz
l Mixing Motor Power: 1.1 kW (1 unit)
l Mixing Speed: 42 rpm (fixed)
l Impeller Diameter: 576 mm
l Impeller Type: Inclined paddle screw strip
l Material: SS304
l Tip Speed: 1.2 m/s
l Number of Impellers: 1
l Number of Shafts: 1
l Clearance (impeller to wall): 10 mm
l Clearance (impeller to bottom): 8 mm
l Principle: Prevents sedimentation with unique impeller design
Top Cover Components
l Material: SS304
l Feed Port: ISO standard quick coupling 1″ ×1
l Sight Glasses: DN80 tempered glass ×2
l Vacuum Port: G3/4″ ×1 set (vacuum/vent)
l Digital Vacuum Gauge Port: M14×1.5 internal thread ×1
l Control System
l Cabinet: Houses inverter and low-voltage components
l Manual Panel: Buttons, knobs, instruments
l Power: AC 3×380 V ±5%, 50 Hz
l Control: Electrical
l Operation: Cabinet panel with buttons/knobs
l Emergency Stop: 1
l Start Button: 1
l Stop Button: 1
l Work Light Switch: 1
Safety Interlock System
Emergency Stop: Immediately halts the system; prevents any further operation
Other Notes
l Seals: Domestic brand; static by O-ring, dynamic by mechanical or skeleton seal
l Grease: Domestic
l Valves: Domestic
l Vacuum Requirement: Customer to supply vacuum system, 8 L/s (2X-8)
l Vacuum Retention: –0.098 MPa; holds >–0.085 MPa for 24 h without leakage
l Main Power: >1 kW
l Weight: Approx. 250 kg
l Dimensions: L830 mm × W830 mm × H1474.5 mm
l Color: Ivory white
l Floor Load: 400 kg/m²
|
No. |
Name |
Specification |
Material |
Quantity |
Remarks |
|
1 |
Top Lid Seal Ring |
ΦD×ΦN |
Silicone |
1 |
Matched to model, per supplier standard |
|
2 |
Sight Glass Seal Ring |
— |
Silicone |
2 |
Matched to model, per supplier standard |
|
3 |
Feed Port Gasket |
— |
Silicone |
1 |
Matched to model, per supplier standard |
|
4 |
Sight Glass Pane |
Tempered |
Glass |
2 pcs |
Matched to model, per supplier standard |
|
No. |
Item |
Standard Requirement |
|
5 |
Workshop Height |
>3.0 m; ensure lift space and maintenance clearance; floor must be clean, level |
|
6 |
Door Dimensions |
Height >2.0 m; Width >1.5 m; ensure equipment can pass through |
|
7 |
Cooling Water |
Must meet cooling demand; forced cooling preferred; heating in winter optional |
|
8 |
Heating |
Maintain >20 °C in winter to avoid hydraulic oil solidifying; ensure lubrication |
|
9 |
Installation Space |
Follow layout drawing |
|
10 |
Air Supply |
5–7 kgf/cm², 50 L/min; for pneumatic pump and other uses |
|
11 |
Other |
No corrosive/explosive gases or liquids |
1 Standard exported package: Internal anticollision protection, external export wooden box packaging.
2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.
3 Responsible for the damage during the shipping process, will change the damaged part for you for free.
DELIVERY TIME:15-20 days after confirming the order, detail delivery date should be decided according to
production season and order quantity.
Contact: Lily You
Phone: +86 18650702009
Tel: +86 18650702009
Email: saleskatbattery@gmail.com
Add: No. 988 Xiahe Road, Siming District, Xiamen City
919121614
adminbuy