HOME >> PRODUCTS >> Lithium Battery Production Machine Line >> Cylindrical Cell Machine
I. Equipment Features
Application Scope
l Once the slurry is prepared in the mixer, the barrel is moved to the lifter, fitted with the agitator head, and then functions as a slurry transfer barrel. It transports the slurry from the mixing workshop to the storage or coating workshop, and through quick-connect couplings, feeds it into the main storage tank or the coating machine head.
II. Main Equipment Parameters
Container Parameters
l Design Volume: 287 L
l Effective Volume: 95–200 L
l Inner Diameter: 750 mm
l Inner Depth: 650 mm
l Material: 304 SS (contact parts)
l Jacket Type: Single‑layer jacket on wall & bottom for heating / cooling
l Jacket Interface: G1" with quick coupling; pressure ≤ 0.4 MPa
l Circulation: Customer‑supplied; inlet ≤ 8 °C, flow > 60 L/min
l Discharge: G1‑1/2" three‑piece ball valve with 2" ISO quick clamp
l Ambient Temp.: –10 °C … +120 °C
l Mobility: Caster‑mounted
l Interchangeable with 200 L mixer barrel
Agitation Assembly
l Frequency: 50 Hz
l Power: 1.5 kW (one unit)
l Speed: 35 rpm (fixed)
l Blade Diameter: 710 mm
l Blade Type: Helical ribbon
l Blade Material: 304 SS
l Tip Speed: 1.2 m/s
l Number of Blades / Shafts: 1 / 1
l Clearance to Wall / Bottom: 20 mm / 10 mm
l Mixing Principle: Unique helical ribbon prevents sedimentation
Top Cover Assembly
l Cover Material: 304 SS
l Feeding Port: ISO 1" quick coupling × 1
l Sight Glass Ports: DN100 tempered glass × 2
l Vacuum Module: G1" set (vacuum & vent)
l Vacuum Gauge Port: M14×1.5 female metric
Control System
l Electrical Cabinet: For inverter & low‑voltage components
l Manual Panel: Buttons, knobs, meters
l Power: AC 3 × 380 V ± 5 %, 50 Hz
l Control Mode: Electrical
l Operation: Panel buttons + knobs
l E‑Stop / Start / Stop / Spotlight Switch: 1 each
Safety Interlock
l Emergency Stop: Immediate shutdown, all functions disabled
Other Notes
l Seals: Domestic; static – O‑rings, dynamic – mechanical or lip seals
l Grease: Domestic
l Valves: Domestic
l Vacuum Requirement: Customer‑supplied 15 L/s (2X‑15)
l Vacuum Holding: −0.098 MPa, ≥ −0.085 MPa / 24 h
l Total Power: > 1.5 kW
l Weight: ≈ 400 kg
l Dimensions: L 980 × W 980 × H 1700 mm
l Color: Off‑white
l Floor Load: 600 kg/m²
III. Spare & Wear Parts List
|
No. |
Name |
Specification |
Material |
Qty |
Remarks |
|
1 |
Upper Lid Seal Ring |
ΦD × ΦN |
Silicone |
1 |
Per supplier std. |
|
2 |
Sight Glass Seal Ring |
– |
Silicone |
2 |
Per supplier std. |
|
3 |
Feeding Port Gasket |
– |
Silicone |
1 |
Per supplier std. |
|
4 |
Sight Glass Lens |
– |
Tempered Glass |
2 |
Per supplier std. |
IV. Supporting Conditions
|
No. |
Item |
Standard Requirements |
|
1 |
Workshop Height |
> 3.0 m; adequate lift & maintenance space |
|
2 |
Door Size |
H > 2.0 m; W > 1.5 m |
|
3 |
Cooling Water |
Forced cooling recommended; hot water in winter |
|
4 |
Heating |
Room > 20 °C to ensure smooth hydraulic operation |
|
5 |
Installation Space |
As per layout |
|
6 |
Air Source |
5–7 kgf/cm², 50 L/min |
|
7 |
Others |
No corrosive / explosive gases or liquids |
Contact: Lily You
Phone: +86 18650702009
Tel: +86 18650702009
Email: saleskatbattery@gmail.com
Add: No. 988 Xiahe Road, Siming District, Xiamen City
919121614
adminbuy