HOME >> PRODUCTS >> Cylindrical Cell Machine
650L High-Capacity Planetary Mixer for Battery Slurry and Glue Dispersion
Scope of Application
Mixing and dispersing of various common medium-to-high viscosity adhesives (powders and liquids), yielding uniformly mixed material.
|
Item |
Specification |
|
Designed Total Volume |
650 L |
|
Inner Diameter |
100 cm |
|
Inner Depth |
83 cm |
|
Container Material |
304 stainless steel (in contact with material) |
|
Temperature Jacket Form |
Double-layer jacket on wall (heating/cooling, insulated); single-layer on bottom |
|
Temperature Jacket Inlet |
G1.5″ with quick-release union |
|
Jacket System |
Customer-supplied; recommended inlet water ≤ 8 °C, flow > 150 L/min |
|
Discharge Outlet |
DN80 plunger-type outlet at bottom |
|
Designed Operating Temperature |
−10 to +120 °C |
|
Barrel Structure |
Steel wheels, motorized movement, with turntable and rails |
|
Item |
Specification |
|
Operating Frequency |
5–50 Hz |
|
Mixing Power |
22 kW |
|
Mixer Speed |
2–23 rpm |
|
Mixer Diameter |
96 cm |
|
Mixer Type |
Two-blade anchor with PTFE wall & bottom scraper |
|
Mixer Material |
304SS (304 stainless steel) |
|
Mixer Tip Speed |
0.1–1.3 m/s |
|
Number of Mixers |
1 No. |
|
Clearance to Wall |
20 ± 2 mm |
|
Clearance to Bottom |
10 ± 2 mm |
|
Item |
Specification |
|
Working Frequency |
5–50 Hz |
|
Dispersing Power |
22 kW × 2 units |
|
Disperser Speed |
160–1600 rpm |
|
Disperser Diameter |
250 mm |
|
Disperser Type |
Serrated disc |
|
Material |
304SS (304 stainless steel) |
|
Tip Speed |
2–20 m/s |
|
Number of Discs |
2 per shaft |
|
Number of Shafts |
2 |
|
Item |
Specification |
|
Scraper Position |
Mounted on mixing anchor |
|
Scraper Material |
PTFE |
|
Scraper Speed |
Same as mixing speed |
|
Item |
Specification |
|
Material |
High-rigidity carbon steel |
|
Lifting Method |
Hydraulic cylinder |
|
Guide System |
Metal guide rods |
|
Lifting Stroke |
≤ 110 cm |
|
Item |
Specification |
|
Top Vessel Material |
304 stainless steel |
|
Quick-Open Sight Port |
DN300 × 1 |
|
Liquid Inlets |
Flanged DN80 × 3, Flanged DN50 × 1 |
|
Powder Inlet |
DN200 × 1 |
|
Vent Port |
DN150 × 1 |
|
Sight Glasses |
DN100 tempered glass × 2 |
|
Vacuum + Breaker Port |
ISO clamp 1″ × 1 |
|
Nitrogen Inlet |
ISO clamp 1″ × 1 |
|
Pressure Sensor Port |
1 |
|
Exhaust Port |
ISO clamp 2″ × 1 |
|
Digital Vacuum Gauge Port |
M20 internal thread × 1 |
|
Spare Ports |
ISO clamp 2″ × 2 |
|
Item |
Specification |
|
Electrical Cabinet |
Houses VFDs and low-voltage components |
|
Manual Operation Panel |
Buttons, knobs, meters |
|
Power Supply |
3×380 V ± 5%, 50 Hz |
|
Control Method |
Electric + hydraulic control |
|
Drive & Speed Control |
VFD-based |
|
Cooling Method |
Air-cooled and liquid-cooled |
|
Operation Interface |
Touchscreen |
|
Digital Temperature Display |
Displays material temperature |
|
Emergency Stop |
1 button |
|
Alarm System |
Over-temperature alarm, stop, alarm cancel |
|
Speed Display |
On touchscreen |
|
Power Indicator |
1 indicator |
|
Timer |
Controls mixing and dispersing simultaneously |
|
HMI Configuration |
Controls integrated into touchscreen |
l Emergency Stop: Immediate shutdown; disables controls.
l Low-Speed Mixing Start: Mixer can operate while lowering beam.
l High-Speed Dispersing: Only operates when beam is fully lowered.
l Interlock During Operation: Beam cannot rise or lid open while running.
l Vacuum Return Prevention: Special buffer tank prevents pump oil backflow.
l Fault Stop: Inverter provides overload, overcurrent, overvoltage, leakage, phase-loss protection.
|
Item |
Specification |
|
Temperature Sensor |
Pt100 |
|
Thermometry |
Measures material and wall simultaneously |
|
Bearings |
Imported for high-speed parts, domestic for low-speed |
|
Seals |
O-rings for static; mechanical for rotary |
|
Lubricants |
Domestic grease; imported for mechanical seals |
|
Hydraulic Cylinder |
Domestic brand |
|
Hydraulic Station |
Domestic brand |
|
Valves |
Domestic brand |
|
Vacuum Requirement |
Customer must supply 45 L/s system (2×45) |
|
Vacuum Holding |
−0.098 MPa and ≥ −0.085 MPa for 24 h |
|
Main Power |
66 kW |
|
Total Weight |
~9500 kg |
|
Dimensions (L×W×H) |
3490×1900×2865 mm (raised height: 4215 mm) |
|
Color |
Yellow |
|
Floor Load Capacity |
2500 kg/m² |
|
No. |
Part Name |
Specification |
Material |
Quantity |
Remarks |
|
7 |
Top Lid Seal ORing |
ΦD×ΦN |
FKM |
1 |
Standard for this model |
|
8 |
Sight Glass Seal Ring |
— |
FKM |
2 |
Standard for this model |
|
9 |
Feed Port Gasket |
— |
FKM |
1 |
Standard for this model |
|
10 |
High-Speed Mechanical Seal |
C+SiC |
Ceramic |
1 |
Standard for this model |
|
11 |
Scraper Plate |
— |
PTFE |
1 |
Standard for this model |
|
12 |
Sight Glass Window |
— |
Tempered |
2 |
Standard for this model |
|
No. |
Item |
Standard Requirement |
|
8 |
Workshop Height |
> 5.0 m; must allow beam lifting and maintenance; clean, level floor |
|
9 |
Door Opening Size |
Height > 3.2 m; Width > 2.5 m for machine access |
|
10 |
Cooling Water Supply |
Mandatory; forced cooling recommended; hot water needed in winter |
|
11 |
Heating |
Indoor temp > 20 °C in northern winter to prevent hydraulic oil solidification |
|
12 |
Installation Space |
As per layout drawings |
|
13 |
Air Pressure Supply |
5–7 kgf/cm², 100 L/min; for pneumatic pump operation |
|
14 |
Other |
No corrosive/toxic/explosive gases or liquids |
650L Material Pressing Machine
Model Number: TMAX-YLJ500
Applicable Scope
Material inside the barrel is discharged by pressing.
1. Matched Container Parameters
Container inner diameter: 1000mm
Container inner depth: 830mm
2. Structural Form
Rectangular frame structure
3. Lifting Method
Hydraulic cylinder lifting the inner frame and mixing barrel
4. Pressing Method
Double-acting hydraulic cylinder drives the pressing plate
4. Discharge Method
Bottom discharge, discharge from the rear of the equipment
6. Pressing Performance Parameters
l Pressing plate size: matched with 1000mm barrel
l Pressing intensity per unit area: 17kg/cm²
l Total output pressure: 122T
l Motor power: 11kW
l Plunger pump flow rate: L/min
l Hydraulic station cooling method: with accumulator, air-cooled cooling
l Pressing plate descent and rise control: foot switch
l Pressing plate material: chrome-plated carbon steel
l Pressing plate sealing method: fixed double sealing rings
7. Barrel Locking Method
Mechanical locking
8. Barrel Transfer Method
Barrel transferred with casters
9. Other Notes
l Total main machine power: ≤11kW
l Total equipment weight: approx. 4000kg; floor load: 1000kg/㎡
l Equipment dimensions: L×W×H (to be specified)
l Appearance color: Yellow
No. Name Specification Material Quantity Remarks
|
2 |
O-ring |
ΦD×ΦN |
Silicone |
1 |
Matched to model, per supplier standard |
PACKAGE:
1 Standard exported package: Internal anticollision protection, external export wooden box packaging.
2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.
3 Responsible for the damage during the shipping process, will change the damage part for you for free.
DELIVERY TIME:15-20 days after confirming order,detail delivery date should be decided according to production season and order quantity
Contact: Lily You
Phone: +86 18650702009
Tel: +86 18650702009
Email: saleskatbattery@gmail.com
Add: No. 988 Xiahe Road, Siming District, Xiamen City
919121614
adminbuy