HOME >> PRODUCTS >> Laboratory Machine >> Electric Furnace

Lab 5KW 6KW 7KW High Temperature Tube Furnace Optional Temp Calibration

Product Name:Lab 5KW 6KW 7KW High Temperature Tube Furnace Optional Temp Calibration
Model:KAT-1200bigtube
Brand Name: KAT
Email: saleskatbattery@gmail.com
Mobile: +86 18650702009
INQUIRY

Lab 5KW 6KW 7KW High Temperature Tube Furnace Optional Temp Calibration

Model	TL1200-I	TL1200-II	TL1200-III
Power	5KW	6KW	7KW
Tube size（OD）(mm)	High purity quartz tube :150/200/250*1000mm(tube diameter optional) with a furnace plug on each side, the furnace plug can block the thermal radiation in the center of the furnace tube, must be placed in the correct position in the furnace chamber before heating
Dimension	610X490X630	650X540X680	750X640X780
Voltage	220V
Phase	single phase
Heating element	Domestic high quality Kanthal resistance wire (imported Kanthal A1 from Sweden is optional)
Control Mode	Use Yudian program temperature control instrument (standard) 1. 30-segment program temperature control intelligent PID adjustment. 2. With over-temperature protection, the electric furnace heating circuit will be automatically cut off when the temperature is over-temperature or when the couple is broken. ON, the ON light on the panel is off, the OFF light is on, and the electric furnace is limitedly protected). 3. With 485 communication interface (standard with optional software) 4. It has a power failure protection function, that is, when the furnace is powered on after the power is turned off, the program does not start from the initial temperature, but starts from the furnace temperature when the power is off. 5.The meter has the function of temperature self-tuning (you need to pay extra for the replacement of imported instruments, optional) FP93 instrument EUROTHERM instrument Touch screen instrument (shimaden, Japan)
Chamber material	1. High-quality high-purity alumina polycrystalline fiber curing furnace formed by vacuum suction filtration. 2. Molded by Japanese technology. 3.The spacing and pitch of the resistance wires in the furnace are all arranged according to the best thermal technology in Japan, and the temperature field is simulated by thermal software.
Valves and flanges
Planform
Control precision	+/- 1℃
Trigger	Phase-shifted trigger
Electric appliance	Zhejiang chint
Silicon controlled	106/16E SEMIKRON
max temp	1200℃
rated temp	1100℃
heating rate	≤30℃/ Min(Can be modified as required)
Recommended rate of heating	≤20 ℃/ Min
Thermocouple Type	K Type
Length of heating section	400mm
Constant temperature length	150mm
Temperature field curve
temp calibration (optional)	Regular temperature calibration of the tube furnace can maintain the accuracy and uniformity of the furnace temperature. You can choose a simple calibration tool from our company to assist you in this task. The complete calibration kit includes standard thermocouples, temperature calibrators, and compensation leads.
Ambient surface temp	≤45℃