HOME >> PRODUCTS >> Laboratory Machine >> Planetary Ball Mill

Ultrafine Horizontal Planetary Ball Mill Machine for Powder Grinding

Product Name:Ultrafine Horizontal Planetary Ball Mill Machine for Powder Grinding
Model:KAT-FCS-22
Brand Name: KAT
Email: saleskatbattery@gmail.com
Mobile: +86 18650702009
INQUIRY

Ultrafine Horizontal Planetary Ball Mill Machine for Powder Grinding

Product introduction

Comminution according to the Planetary Principle
The comminution of the material to be ground takes place primarily through the high-energy impact of grinding balls. To achieve this, the grinding jar, containing the material to be ground and grinding balls, rotates around its own axis on a main disk whilst rotating rapidly in the opposite direction. At a certain speed, the centrifugal force causes the ground sample material and grinding balls to separate from the inner wall of the grinding jar. The grinding balls then cross the jar at high speed and further grind the sample material by impact against the opposite jar wall. In addition, impact between the balls themselves on the sample material adds to the size reduction process.

Technical parameters

Optimal for material type:	medium-hard, soft, brittle, tough, moist
Item No.:	KAT-FCS-22
Max. feed size:	10mm
Final fineness:	<100nm
Min. sample quantity:	10ml
Max. sample quantity:	900ml
Rotational speed (disk):	50-400r/min
Rotational speed (jars):	100-800r/min
Transmission ratio:	1:-2
Transmission standard:	CE
Grinding modes:	16 modes programmable
Grinding tools:	grinding jars and grinding balls
Bi-direction grinding:	yes
Continuously grinding	00:01:00 - 99:59:59
Paused interval:	00:01:00 - 99:59:59
Emergency stop:	yes
Power off memory:	yes
Overload protection	Yes
Milling chamber lighting:	No
Number of milling samples:	4 simultaneously
Materials of the grinding jars:	SS304, SS316, nylon, PTFE, agate, zirconia, alumina, PU, WC
Number of working stations:	4
Ball mill type:	horizontal
Compatible grinding jars:	50ml / 100ml / 250ml / 500ml
Materials of milling balls:	SS, agate, zirconia, alumina, nylon, PTFE
Grinding ball diameter:	3/5/10/15/20mm
Compatibal ball weight	200-1000g
Grinding process:	dry /wet grinding
Vacuum grinding:	yes
Low temperature grinding:	yes
Grinding in inert gas:	yes
Temperature detection:	yes ( special accessories)
Pressure detection:	yes ( special accessories)
Electrical details:	100-120V/200-240V AC ,50-60Hz, 750W
Plug types:	GB/EU/US/UK standard
Net weight:	130kg
Dimensions (W x D x H):	750500500mm
Noise level:	60dB
IP rank:	IP60
Product standard:	CE
Patent:	design patent/ noise improve patent
Accessories:	user manual, warranty card

Material	Main component	Density (g/cm3)	Abrasion resistance	Use for material to be ground
Agate	SiO2	2.65	Good	Soft to medium-hard samples
Sintered corundum	Al2O3	3.8	Fairly good	Medium-hard, fibrous samples
Silicon nitride	Si3N4	3.25	Excellent	Abrasive samples, iron-free milling
Zirconium oxide	ZrO2	5.7	Very good	Fibrous, abrasive samples