HOME >> PRODUCTS >> Lithium Battery Lab Pilot Machine Line >> Pouch Cell Lab Equipment
We can supply aluminium laminated case with customized size.
|
Layers from outside
(Shiny) to inside (Mat)
|
Polyamide (JIS Z1714): 0.025mm (+-0.0025mm)
Adhesive (Polyester-polyurethane): 4-5 g/m2 |
|
Thickness |
113μm |
|
Width |
400mm |
|
Length |
10m |
|
Surface quality |
Mat finish |
|
Pinholes |
Subject to the applicable aluminum foil standard |
|
Impurity |
1mm or less in diameter |
|
Fish Eye |
2mm or less in diameter (clear),1mm or less in diameter (colored) |
|
Molding Depth |
≥5.0mm |
|
Electrical Insulating |
Good |
|
Hot Sealing Coniditon |
180-190°C |
|
Moisture Vapor / O2
Transmission Rate |
200ppm / 5 years |
|
Laminate Strength |
Nylon/Al more than 2N/15mm Al/CPP more than 5N/15mm |
|
Heat Seal Strength |
More than 22.5N/15mm wide at 200℃ x 0.2Mpa x2 sec by KAT heat sealing machine |
|
Solvent Retention |
Less than 5mg/m2 |
|
Appearance |
Within the sample of the limit |
|
Slip Factor |
CPP/CPP less than 1.0 |
|
Application Notes |
Click the picture below to see the finished polymer Li-Ion battery made by heated sealer |
Contact: Lily You
Phone: +86 18650702009
Tel: +86 18650702009
Email: saleskatbattery@gmail.com
Add: No. 988 Xiahe Road, Siming District, Xiamen City
919121614
adminbuy