HOME >> PRODUCTS >> Lithium Battery Lab Pilot Machine Line >> Prismactic Cell Lab Equipment
Laboratory Prismatic Battery Cell Sheet Shaping Press and Cutting Machine
Introduction
1. 1 Function: this is special design for cut and shaping press of stacking cell after tab welded.
1.2 After placing the tab weld cell in place, step on the foot switch, the cylinder drives the upper pressure block and the knife to move downwards to cut off the excess stacking material and tabs, and then move the station to press the remaining tabs to flatten.
Technical parameter
|
Compressed air |
0.5-0.8 MPa |
|
|
Cutting pressure |
≤1000Kgf |
|
|
Cutting strock |
15mm |
|
|
Cutter length |
200mm |
|
|
Press pressure |
≤1000Kgf |
|
|
Working speed |
300-500 times/hour, accoridng to real process parameter |
|
|
Equipment weight |
About 140kg |
|
|
Appearance Colour |
According to customer requirement, customer provide colour plate |
|
|
Voltage |
Single-phase: 220V/60Hz |
|
|
Power |
100W |
|
|
Suitable battery width |
<225mm( this is standard machine, will custom accoridng to
customer’s real battery dimention) |
|
|
Process performance |
1. Manual feeding and unloading;
2. Manual conversion between cutting and flattening;
3. Manual or foot control action;
4. With automatic counting function; 5. There are safety protection door panels around. |
|
Contact: Lily You
Phone: +86 18650702009
Tel: +86 18650702009
Email: saleskatbattery@gmail.com
Add: No. 988 Xiahe Road, Siming District, Xiamen City
919121614
adminbuy